ETHERNET I/O

    img

Ethernet I/O

    ethernetio
  • The ETH IO – 2.0 unit enables the user to monitor the Analog and Digital inputs, control relay outputs. The status of the slave units are connected to it through MODBUS protocol.
  • A single box of ETH IO – 2.0 contains 8 Analog inputs, 8 Digital inputs, 8 potential free relay contacts, a query based response unit on the RS 232 bus, and a RS 485 port to connect to the slave units. Up to 6 slave units can be connected through the RS 485 interface.
  • Using the LAN (RJ45 Connection), all of the information of the inputs and the status of the different units which are connected to it , will be sent to the main server.
Serial Config RS 232 RS 485
Interface RS 232 RS 485
Baud Rate 2400 9600
Data Bits 8 8
Parity No Parity Even
Stop Bits 1 1
Flow Control None None
LAN Interface
Speed 10/100 Mbps
Protocol TCP/IP
Protocols
MODBUS Connected to communicate with slave units
HTTP Posting the data using LAN. GSM/GPRS (Optional)
Telnet Configuring the unit
Inputs Digital Inputs Analog Inputs
Number of Inputs 8 8
Input Voltage 5 – 24 V DC 0 – 12 V for input pin 1 – 7. 0 – 100 V for input pin 8
Isolation/Input type Isolation – 3750 V RMS Input type – Single ended
Relay Outputs Slave Units
Number of Outputs 8 Maximum number of slaves – 6
Relay Contacts Normally close, Normally open and Common Protocol – MODBUS through
Contact Rating 1A at 120V AC or !A at 24V DC Slave ID – 1 to 254
GSM/GPRS Optional
Environmental
Operating 0 to 55°C
Storage -40 to 85°C
Power Indicators(LED)
Input 12 V DC, 1 Amp Power – Red
Protection Fuse and reverse Polarity protection Connection Establishment – Yellow
Internal Battery Optional Digital Data and Relay status – Red

 

Packaging
Dimensions 206 mm (L) x 156 mm (W) x 41 mm (H)
Weight 825 g
Warranty 12 Months for box product

Applications

    img2
  • Industrial Control & Automation.
  • Environment monitoring & control.
  • Plant Automation.
  • Building Management System.(BMS)

    img3
  • Remote Data Logging.
  • ATM Management.
  • Mobile Tower Management & manymore.
Model Number Description
ETH IO – 2.0 Ethernet based Input Output Unit – RTU (Remote Terminal Unit)

Request for Quote