CAN Data Logger
- CAN (Controller Area Network) DATA LOGGER is a standalone data collecting unit, which can collect and store the data from CAN bus by sending appropriate queries.
- It has storage capacity up to 16 GB, to store captured Data.
- The Device supports Communication Rate from 20 Kbps to 500 Kbps.
Features & Specifications
|Bit Rate||20 Kbps to 500 Kbps|
|Connectors||OBD2 Male Connector & USB micro Connector|
|Storage||Up to 16 GB using SD Card|
|Red||The Red LED glows when the device is getting power from the connected CAN Port over OBD2 connector.|
|Green||The Green LED glows when the device is getting power from the connected PC over USB connector.|
|Yellow||ON – When there is no response from CAN Slave device.
Slow Blink 800 ms ON, 200 ms OFF – When there is response from CAN Slave device.
Fast Blink 40 ms ON, 40 ms OFF – When the Memory is full.
|Input||12 V DC, 50 mA|
|Operating||0 °C to 55 °C|
|Storage||0 °C to 85 °C|
|Dimensions (LxWxH)||100 mm(L) x 54 mm(W) x 32 mm (H)|
- Bus Load Monitoring
- CAN device development and test
- Industrial Automation.
|CAN DATA LOGGER||CAN DATA LOGGER|